কনটেন্টে যান

Multimedia and Codecs

A fresh Fedora install plays AV1 and WebM perfectly and chokes on a plain MP4. That is the first thing most people hit, and it is the one post-install problem where the fix genuinely requires software Fedora cannot ship.

This page covers the codec situation end to end: what already works, what RPM Fusion adds, how to get hardware video decoding actually running, and why none of it applies to your Flatpak apps.

Why the multimedia stack is limited

The constraint is legal, not technical. H.264, HEVC/H.265, VC-1 and several older MPEG formats are covered by patent pools that license per-unit, and shipping decoders for them would mean paying those pools or accepting the liability. See the landing page for the general shape of that argument.

Two specific things are missing, and both follow from the same decision:

  • Fedora's FFmpeg is a reduced build. The package is called ffmpeg-free, and it is compiled with the patent-encumbered decoders and encoders switched off. Everything that links libavcodec inherits that — mpv, VLC, Chromium, Firefox, GStreamer's libav plugin.
  • Mesa gets the same treatment. Fedora 44 does not ship mesa-va-drivers at all, so on AMD and on Intel-via-Mesa there is no VA-API driver for the restricted formats to begin with.

Everything below is a way of putting those two pieces back.

What already works

None of this needs a third-party repository:

  • AV1 — dav1d for decode, libaom / rav1e / SVT-AV1 for encode
  • VP8 and VP9, Theora, and the whole WebM path
  • Opus, Vorbis, FLAC, MP3 decode and encode (LAME), AAC decode (fdk-aac-free)
  • Matroska, WebM, Ogg, MP4 containers — the container is not the problem, the video track inside it is
  • H.264 via OpenH264, from the fedora-cisco-openh264 repository

OpenH264 deserves its own paragraph, because it is the source of a lot of confusion. It is built in Fedora's infrastructure but distributed by Cisco, which pays the licence fees for the binary. The repository has been enabled by default since Fedora 33. It is Constrained Baseline profile only and software only, which means it covers WebRTC video calls and little else — a 1080p High profile MP4, which is essentially every video file you will encounter, is not something OpenH264 can decode.

If the repository is disabled on your install:

sudo dnf config-manager setopt fedora-cisco-openh264.enabled=1

sudo dnf install openh264 mozilla-openh264 gstreamer1-plugin-openh264

What does not work on a stock install: H.264 High profile, HEVC/H.265, VC-1, and hardware-accelerated decode of any of them on any GPU.

The list for your own machine, which is the only one that matters:

ffmpeg -hide_banner -decoders | grep -iE 'h264|hevc'

The exact set of disabled decoders shifts between releases as patents lapse, so treat that output as the authority rather than any list written down elsewhere.

RPM Fusion

The codecs on this page come from RPM Fusion: the free side for the patent-encumbered open source packages, nonfree for Intel's full media driver. That page covers enabling it, what it costs you in trust and support, and the atomic-desktop variant.

Everything below assumes free and nonfree are enabled.

Installing the codecs

Swap to the full FFmpeg

This is the single step that fixes most things:

sudo dnf swap ffmpeg-free ffmpeg --allowerasing

RPM Fusion's ffmpeg declares a conflict with ffmpeg-free, and --allowerasing is genuinely required here because the whole libav*-free family has to come out with it.

What that one command unlocks, because all of these link or dlopen libavcodec: mpv, VLC (through vlc-plugin-ffmpeg), Fedora's Chromium, Firefox, and GStreamer's libav plugin. It also switches on the VA-API decode paths inside FFmpeg itself — the hardware side still needs a driver, covered below.

The lighter alternative. libavcodec-freeworld keeps Fedora's ffmpeg-free installed and drops a fuller libavcodec into /usr/lib64/ffmpeg, ahead of the Fedora one on the linker path. It exists for people who want to stay on Fedora's FFmpeg build and only add the missing decoders:

sudo dnf install libavcodec-freeworld

Pick one or the other. If you have done the ffmpeg swap, libavcodec-freeworld has nothing left to complement and you do not need it.

GStreamer plugins

GStreamer is a separate decode stack from FFmpeg, and it is what GNOME Videos (Totem), GNOME Music, Rhythmbox, Cheese and most GTK/Qt media apps use. Fedora's multimedia group covers the free plugins; RPM Fusion extends the same group with the restricted ones, and dnf5 merges the two definitions:

sudo dnf group install multimedia --setopt=install_weak_deps=False --exclude=PackageKit-gstreamer-plugin

install_weak_deps=False keeps it from dragging in recommended extras you did not ask for. PackageKit-gstreamer-plugin is excluded because it is the piece that pops up "additional software is required to play this file" dialogs, which are unhelpful once you have installed the codecs by hand.

If you would rather name the packages than trust a group:

sudo dnf install gstreamer1-plugins-ugly gstreamer1-plugins-bad-freeworld

gstreamer1-plugins-ugly (RPM Fusion) coexists with Fedora's gstreamer1-plugins-ugly-free rather than replacing it. gstreamer1-plugins-bad-freeworld is what provides HEVC decode to GStreamer, via libde265.

Optional extras

sudo dnf install libheif-freeworld

HEIC/HEIF images — the format iPhones shoot in. Fedora's libheif can read the container but not the HEVC-coded image data inside it.

sudo dnf install vlc-plugins-freeworld

Adds the x264 and x265 encoders to VLC. VLC's decoding comes from FFmpeg, so this only matters if you transcode.

Encrypted DVDs need the tainted repository — see Third-Party Repositories — and then libdvdcss:

sudo dnf install libdvdcss

libdvdcss circumvents CSS. Whether that is lawful where you live is a question this page cannot answer for you.

Hardware video acceleration

Software decode of 1080p is fine on any modern CPU. 4K, high-bitrate HEVC, and laptop battery life are where hardware decode stops being optional.

VA-API is the interface that matters now. VDPAU is effectively finished on the open drivers: Mesa removed the VDPAU state tracker upstream, and Fedora 44 dropped the mesa-vdpau-drivers package with it. vdpauinfo still exists and still reports something useful on NVIDIA's proprietary driver, which provides its own VDPAU implementation. On AMD and Intel, ignore VDPAU entirely.

Install the diagnostic tools first:

sudo dnf install libva-utils

vainfo

Read the output for entrypoints as well as profiles. A line reading VAProfileH264High : VAEntrypointVLD means hardware decode of H.264 High is available. If vainfo reports no driver at all, or lists only VAProfileNone, the driver is the problem, not the codec package.

How Fedora wires the replacement drivers. Fedora patches libva to search /usr/lib64/dri-nonfree, then /usr/lib64/dri-freeworld, then /usr/lib64/dri. RPM Fusion's drivers install into the first two directories, so they take precedence automatically. You do not need LIBVA_DRIVERS_PATH or any other environment variable to make the swap take effect.

Which package restores hardware decode depends on the GPU:

GPU Page
AMD AMD hardware decode
Intel Intel hardware decode
NVIDIA NVIDIA hardware decode

On Silverblue, Kinoite and the other rpm-ostree variants, the whole approach differs — see Atomic Desktops.

Firefox and Chromium

Firefox on Fedora loads the system FFmpeg at runtime. With ffmpeg-free installed it falls back to OpenH264 for H.264, which is why video on a stock install is either absent or software-decoded at baseline quality. After the ffmpeg swap it gets the full decoder set and can use VA-API.

Check about:support and look at the HARDWARE_VIDEO_DECODING row. "Available by default" means it is on. Hardware decode has been enabled by default for Intel and AMD users since firefox-101.0.1-4, and works under both Wayland and X11. The master switch is media.hardware-video-decoding.enabled in about:config.

When it is not working, the log tells you why:

MOZ_LOG="FFmpegVideo:5" firefox

The recurring causes, in rough order of frequency: ffmpeg-free is still installed; no VA-API driver is installed for the GPU; vainfo works but the profile the site uses is not in the list (a 10-bit HEVC stream on hardware that only decodes 8-bit, for instance); or a hybrid-graphics laptop is rendering on one GPU and trying to decode on the other.

Chromium as packaged by Fedora links the system libavcodec, so the same ffmpeg swap gives it H.264 and HEVC. Verify at chrome://gpu — you want "Video Decode: Hardware accelerated" rather than "Software only". Recent Chromium releases enable VA-API on Linux without launch flags; older ones needed --enable-features=VaapiVideoDecodeLinuxGL, which was renamed to AcceleratedVideoDecodeLinuxGL in Chromium 131. If you are copying a flag from an old forum post, that rename is probably why it does nothing.

DRM and streaming services. Firefox downloads the Widevine CDM itself once you allow DRM-controlled content in its settings; nothing needs installing. Fedora's Chromium ships no CDM, and neither Fedora nor RPM Fusion packages one, so Netflix and similar will not play in it. If you need DRM in a Chromium-based browser, use Google Chrome, which bundles the CDM. Expect resolution caps regardless: Linux browsers get software-level Widevine, and most services restrict that to 720p or 1080p.

Flatpak apps

Flatpak applications do not use your host's codecs. They run against a runtime — usually org.freedesktop.Platform or a GNOME/KDE runtime built on it — with its own FFmpeg and its own GStreamer. Installing every package on this page changes nothing for a Flatpak Firefox, and conversely, codecs inside a Flatpak do nothing for your host applications. This is the single most common reason someone reports that "the codecs didn't work".

Runtime 25.08 and newer replaced the old ffmpeg-full and openh264 extensions with org.freedesktop.Platform.codecs-extra, which is installed automatically alongside the runtime. There is nothing for you to do.

Runtime 24.08 and older still needs the extension added by hand:

flatpak install flathub org.freedesktop.Platform.ffmpeg-full//24.08

The branch must match the runtime the app uses. Find that with:

flatpak info --show-runtime org.videolan.VLC

Hardware decode inside a Flatpak uses the runtime's Mesa, not yours, and needs access to /dev/dri — which most media applications already hold. The practical consequence is that a Flatpak can have working hardware decode on a host with none installed, and vice versa. Check with the application's own diagnostics (about:support, chrome://gpu, mpv's console output) rather than assuming the host result carries over.

Testing what your system supports

Installing a package and having an application use it are two different things, and most reports that "the codecs did not work" live in the gap between them. These checks run from the library layer outwards, and each one says what its output should look like.

Which FFmpeg is installed

dnf5 repoquery --installed --queryformat '%{name} %{from_repo}\n' 'ffmpeg*'

ffmpeg-free from fedora or updates is Fedora's reduced build. ffmpeg from a third-party repository is the full one. If you took the libavcodec-freeworld route instead of the swap, ffmpeg-free stays installed and the package name stops answering the question — go by the decoder list.

That list, the command in What already works, is the authority for your machine. On Fedora 44's ffmpeg-free the h264 and hevc rows are absent from it rather than present and disabled, while mpeg2video is there, because those patents have expired.

Encoders are a separate list:

ffmpeg -hide_banner -encoders | grep -iE 'libx264|libx265|vaapi'

The reduced build offers libopenh264 for H.264 and nothing for HEVC. The full build adds libx264 and libx265 for software encode, plus h264_vaapi and hevc_vaapi for GPU encode.

ffmpeg -hide_banner -hwaccels

That prints the acceleration methods FFmpeg was compiled with — typically vaapi, vdpau, vulkan, cuda, qsv. It reports on the binary rather than the hardware, so vaapi in that list says nothing about whether a driver is installed.

To see what a particular file asks for:

ffprobe -hide_banner -v error -select_streams v:0 \
  -show_entries stream=codec_name,profile,pix_fmt \
  -of default=noprint_wrappers=1 video.mp4

Output of codec_name=hevc, profile=Main 10, pix_fmt=yuv420p10le means the file wants 10-bit HEVC, a different hardware capability from 8-bit. That is the value to match against the vainfo profile list.

What GStreamer has

GStreamer is the stack behind GNOME Videos, Rhythmbox, Cheese and most GTK and Qt media applications, and it keeps its own plugin registry. The gstreamer1 package provides the inspector.

gst-inspect-1.0 | tail -1

The closing line summarises the registry — Total count: 237 plugins, 1374 features on a desktop install with the full plugin set. The number means little on its own; it is useful as a before-and-after.

Reading 1300 features is not a test. Ask about one element instead:

gst-inspect-1.0 avdec_h264

A present element prints a factory block with its Rank, Klass and the plugin Filename it came from. A missing one prints No such element or plugin 'avdec_h264' and exits 255, which scripts can key off.

avdec_h264 and avdec_h265 come from gstreamer1-plugin-libav, which wraps whichever libavcodec is installed and registers only the codecs that library provides. With ffmpeg-free in place neither element exists at all — avdec_mpeg2video, avdec_vp9 and avdec_aac are there, the H.264 and HEVC wrappers are not. After the swap they appear. HEVC through gstreamer1-plugins-bad-freeworld arrives as a different element, so find it by pattern rather than by guessing the name:

gst-inspect-1.0 | grep -iE 'h264|h265|hevc'

A plugin can also load with nothing usable inside it:

gst-inspect-1.0 va

Plugin details followed by 0 features means the VA-API plugin loaded and found no codec in the driver to wrap.

VA-API state

Installing libva-utils and running vainfo, and Fedora's driver search path, are covered in Hardware video acceleration. What the two columns of its output mean:

  • The profile is the format and its variant — VAProfileH264High, VAProfileHEVCMain10, VAProfileAV1Profile0. A profile that is absent from the list is unavailable, whatever FFmpeg reports about its own decoders.
  • The entrypoint is what the hardware will do with that profile. VAEntrypointVLD is decode; VAEntrypointEncSlice and VAEntrypointEncSliceLP are encode. A profile listed only with VAEntrypointVLD decodes and does not encode.

Above the table, vainfo names the driver it opened and the path it loaded it from, which is how to confirm the freeworld or nonfree driver won the search order rather than Fedora's stripped one.

Did playback use hardware decode?

A clean vainfo reports what the GPU can do. Whether an application asked for it is a separate question, and the two disagree often enough that assuming is where most of this goes wrong. mpv is the shortest way to watch the decision happen:

sudo dnf install mpv

mpv --hwdec=auto video.mp4

On success, mpv prints one line at default verbosity:

Using hardware decoding (vaapi).

nvdec, vulkan or any -copy variant in the brackets is also a hardware path. No such line means software decode: mpv does not announce the fallback, and that silence is what gets misread as success.

When the line is missing, ask mpv why:

mpv --hwdec=auto --msg-level=vd=v video.mp4

That prints a Looking at hwdec h264-vaapi... line per candidate with the reason each was rejected, the pixel formats the decoder offered, and the codec profile it found in the file.

Then confirm against load. Software decode of 4K keeps several cores busy; hardware decode barely moves them:

top -p "$(pgrep -d, -x mpv)"

GPU-side counters are more direct where they exist: radeontop on AMD, intel_gpu_top (from igt-gpu-tools) on Intel, and nvtop, which handles AMD, Intel and NVIDIA. Watch the video or decode engine rather than overall GPU load.

Browsers

Firefox and Chromium covers the capability readouts: the HARDWARE_VIDEO_DECODING row in Firefox's about:support, and the Video Decode line at chrome://gpu. Both report what the browser believes it can do.

For what one playback did, Chromium keeps a per-player log at chrome://media-internals: start a video, open that page, select the player entry and read the decoder name. FFmpegVideoDecoder is software decode; VaapiVideoDecoder or VDAVideoDecoder is hardware. The exact names have changed between Chromium versions, so treat them as a guide to what to look for rather than a fixed list. In Firefox the equivalent is the MOZ_LOG run in that same section.

Inside a Flatpak

Host results do not carry into a sandbox, so these checks have to run inside one. Start with the tools the runtime happens to carry:

flatpak run --command=sh io.mpv.Mpv -c 'command -v ffmpeg gst-inspect-1.0 vainfo'

On the freedesktop 25.08 runtime that prints paths for ffmpeg and gst-inspect-1.0 and nothing for vainfo, which the runtime does not ship. Anything it does list can be run in place:

flatpak run --command=ffmpeg io.mpv.Mpv -hide_banner -decoders | grep -iE ' (h264|hevc) '

Two rows there means the runtime's FFmpeg has both, whatever the host has. The extension that supplies them on current runtimes:

flatpak list --runtime --columns=application,branch | grep -i codecs

org.freedesktop.Platform.codecs-extra on a branch matching the application's runtime is the expected result — see Flatpak apps for the branch rules and for older runtimes. Substitute the application you care about for io.mpv.Mpv; each one answers only for its own runtime.

Troubleshooting

Why does an MP4 refuse to play when WebM and AV1 files work?

The container is fine; the H.264 or HEVC video track inside it is what Fedora's build cannot decode, and OpenH264 covers a profile almost no video file uses. The fix is the FFmpeg swap, plus the GStreamer plugins for GNOME Videos, Rhythmbox and other GTK/Qt applications, which decode through a separate stack and need their own packages.

Why do Flatpak applications still fail after installing the codecs?

They never saw the install. A Flatpak decodes with its runtime's FFmpeg and GStreamer, so host packages change nothing inside the sandbox. See Flatpak apps for the runtime extensions and Inside a Flatpak for confirming what the sandbox holds.

Why is there video but no sound, or sound but no video?

Usually the stream is partly decodable — an AAC audio track Fedora can handle inside an MP4 whose H.264 video track it cannot, or the reverse. Confirm by testing a known WebM/AV1 source against a known MP4. If both fail, the problem is audio routing rather than codecs; check wpctl status for a sensible default sink first.

Why is 4K playback stuttering with the fans spinning up?

Software decode. Two things have to hold, and each has its own check: the driver has to expose the profile, which VA-API state covers, and the application has to take it up, which Did playback use hardware decode covers. A clean vainfo alongside a software-decoding player is the usual finding, and only the second check catches it.

Why is HEVC still missing after installing everything?

HEVC comes from three different places depending on the application: the full ffmpeg for anything FFmpeg-based, gstreamer1-plugins-bad-freeworld for GStreamer applications, and the GPU driver for hardware decode. Installing one does not cover the others. On hardware older than roughly 2015 there may be no HEVC hardware decode at all, and 10-bit HEVC (HDR content) is a separate capability from 8-bit — compare the file's ffprobe profile against the profiles vainfo lists.

Why won't Netflix and other streaming services play?

See the DRM note in Firefox and Chromium. If Firefox is involved, check that "Play DRM-controlled content" is enabled in Settings and that the Widevine plugin shows as installed under about:addons.

Why did a Fedora upgrade break codecs that used to work?

Major version upgrades are where RPM Fusion setups come apart. The release packages need updating for the new Fedora version, and the ffmpeg swap can silently revert to ffmpeg-free if dependency resolution takes the easy path. After any major upgrade, run rpm -q ffmpeg and re-do the swap if it comes back empty.

Why does hardware decode fail on NVIDIA when everything is installed?

NVIDIA plus VA-API is the combination most likely to need the environment variables in the NVIDIA section above; libva-nvidia-driver is a shim over NVDEC and usually has to be pointed at explicitly. Set those before concluding the codecs are at fault, and confirm the result with Did playback use hardware decode rather than by eye.

Sources

The package names and commands on this page were checked against Fedora 44 and RPM Fusion's Fedora 44 repositories. Where something is version-specific it is called out in the text. The upstream documentation, which is authoritative when this page and it disagree: